How to Calibrate the WAVE + Lily (Pen Touch)

Pair the WAVE + Lily with your phone or tablet


Download the free Touchjet Mobile app using your smartphone or tablet. You will use this as a smart remote to complete the setup process for the WAVE + Lily.


Turn on your TV and set its input source to the HDMI port/channel connected to the WAVE + Lily.

Go to your phone or tablet’s Wi-Fi settings menu and connect to your WAVE’s Wi-Fi hotspot. Prior to connecting the WAVE + Lily to your local wifi network, WAVE + Lily will emit its own Wi-Fi hotspot.

Note: The name of this network should also appear in the top right corner of the WAVE + Lily screen.

Open the Touchjet Mobile app on your smartphone or tablet. Under Touchjet Devices, you will see your WAVE + Lily listed. Tap Touchjet WAVE-XXXX to connect the two devices. You may need to refresh the page using the button in the top right corner and wait a moment for the WAVE + Lily to appear on the device list.



Step 6

Adjust your touch display size (optional)


If the touch display appears bigger or smaller than your TV screen, you can adjust the size by following the steps below.


Using the Touchjet Mobile app on your phone or tablet, launch the Display Settings app.

Using the touch pad function, select Display Position.

Now tap the - / + to adjust the screen size until it fits your TV screen.



Step 7

Touchscreen Calibration


In the Settings menu of the Touchjet Mobile app, press Start Calibration.



You can now set aside your phone or tablet, as the next few steps will be done directly on your TV screen using the Lily Digital Pen. You are about to teach your WAVE + Lily where it will find the borders of your screen and what to perceive as touch. Use only one Lily Digital Pen at a time for this process. 


Touch the first point on the screen until the dot turns from white to yellow, then lift your stylus from the screen. You should repeat this process for all five dots that appear.



After the fifth point turns yellow, wait for the calibration to complete and then tap the button Press to Finish to complete calibration.



Once the calibration process is completed, you can fully use the Pen Touch functionality of the WAVE + Lily, or continue to use the Touchjet Mobile app on your smartphone/tablet as a smart remote.





Have more questions? Submit a request


Powered by Zendesk