There are 3 options on how your iOS device can be compatible with your Touchjet Pond projector.
1. Using the Touchjet App on your iPhone and iPad, you can use your iPhone / iPad as a remote control for both the Pond and WAVE.
2. Via the mini HDMI port at the back of the Pond. You will need the following cables.
- HDMI to mini HDMI cable
- Lightning Digital AV Adaptor
Connect the Pond via the cables with your iOS device. Then switch the Input Source by clicking on the On/Off icon. When an external device is connected to your Pond, it will function only as a projector (duplicating the image from that source).
For more information, please check out our Getting Starting video.
3. MirrorOp App - To take advantage of the interactive screen you can try the App, MirrorOp, to connect your iOS devices to your Pond via a local wifi network, the touch interactive screen works in this configuration, but you may get delays (less than 1 seconds on most wifi connections, but can reach 3-4 seconds). The Pond will be the MirrorOp Receiver and your iOS device will be the MirrorOp Sender. For more information, please go to MirrorOp's website. http://www.mirrorop.com/product_Mac_Sender.html